Part footprint for updating.

There are other major problems here--the through hole pins are not the correct sizes.

Hello FA1234

Thank you for reaching out. Could you please elaborate and share the reference document or an image highlighting which guide pins are missing in the footprint? This will help us review and modify the footprint if needed.

From our review, the slot dimensions in the footprint are based on the Recommended PCB Layout – Top View (page 3 of the datasheet) and are defined with accurate sizing.
https://s3.amazonaws.com/snapeda/datasheet/UJ20-C-H-G-SMT-P16-TR_Same_Sky.pdf

However, we’d be happy to re-check your findings once we have more details.

Best Regards
Amina

This is my fault. Here's the sheet I was looking at:
https://www.sameskydevices.com/product/resource/uj20-c-h-g-smt-1-p16-tr.pdf

Notice it's an UJ20-C-H-G-SMT-1-P16-TR (this part is not the SMT-1, but just an SMT-TR). The -1 version has the guide pins and different slot sizes. I apologize!

Hello FA1234

Thank you for clarifying, and no worries at all—these things happen! We really appreciate you double-checking and sharing the correct datasheet link.

You’re absolutely right—the UJ20-C-H-G-SMT-1-P16-TR version includes guide pins and different slot sizes, while the UJ20-C-H-G-SMT-P16-TR version does not. That explains the difference you spotted.

I’m glad we were able to sort this out, and your diligence helps ensure accuracy not just for you but for the entire community. Please don’t hesitate to reach out anytime if you have further questions or need assistance—we’re always happy to help.

Best Regards
Amina